Update at post #41 (top of the 2nd page)
So yeah, season is over, DH01 came out really awesome, time for an Enderpo bike!
Spec
26" wheels
6.3" travel (160 mm), high single pivot with 0.6" (15 mm) reward travel
Idler (not shown)
66* HA
73* STA
16.53" CS (420 mm)
13" BBH (330 mm)
46.65" WB in Large size (1185 mm)
18.11" Reach (460 mm)
44mm HT
142 x 12 mm axle, 73mm standard BB
Low Direct mount front der. (Sram S3 type/Shimano low DM)
Post mount 74mm DM rear caliper 180mm (not shown)
ISCG 05
7,5 lb~ without shock
True Temper Supertherm/OX Platinum tubing
7075 T651 liinkage
BB main pivot 24 mm axle
8,5x2,5" shock (216x63mm)
accepts every seatpost size with a reducer.
Very supple begining of the stroke, progressive feel through the travel. Idler for nice anti-squat and lower pedal feedback.
Wanna built couple of frames for testing (Enduro and some DH but not DH01), and hopefully start a small company in the end of this year. Any thoughts, sugestions or ideas?
So yeah, season is over, DH01 came out really awesome, time for an Enderpo bike!
Spec
26" wheels
6.3" travel (160 mm), high single pivot with 0.6" (15 mm) reward travel
Idler (not shown)
66* HA
73* STA
16.53" CS (420 mm)
13" BBH (330 mm)
46.65" WB in Large size (1185 mm)
18.11" Reach (460 mm)
44mm HT
142 x 12 mm axle, 73mm standard BB
Low Direct mount front der. (Sram S3 type/Shimano low DM)
Post mount 74mm DM rear caliper 180mm (not shown)
ISCG 05
7,5 lb~ without shock
True Temper Supertherm/OX Platinum tubing
7075 T651 liinkage
BB main pivot 24 mm axle
8,5x2,5" shock (216x63mm)
accepts every seatpost size with a reducer.
Very supple begining of the stroke, progressive feel through the travel. Idler for nice anti-squat and lower pedal feedback.
Wanna built couple of frames for testing (Enduro and some DH but not DH01), and hopefully start a small company in the end of this year. Any thoughts, sugestions or ideas?
Attachments
-
277.4 KB Views: 843
-
285.9 KB Views: 775
Last edited: