[Ringer]

Have an 09 glory dh with the tapered HT, and the stock cane creek headset has a lower, POS non sealed bearing.

Looking to replace it with a sealed unit, and was wondering if anyone knew the part number of the sealed bearing that would fit in its place, or if you can even replace the non-sealed with a sealed bearing like the upper cup.

Thanks!

 

[RayB]

Have an 09 glory dh with the tapered HT, and the stock cane creek headset has a lower, POS non sealed bearing.

Looking to replace it with a sealed unit, and was wondering if anyone knew the part number of the sealed bearing that would fit in its place, or if you can even replace the non-sealed with a sealed bearing like the upper cup.

Thanks!

Scott,

Can't you just hammer the bottom one out and replace it with an E.13 flush cup (or something similar)?

Or, if you're just trying to replace the bearing (assuming it's a 1.5">>1-1/8" reducer lower cup), I think the actual bearing 'number', per Cane Creek, is "HSS20130" (which is the 36 x 45 IS-style) for the sealed cartridge unit.

Hope this helps...

 

[bizutch]

Call Cane Creek today here in Asheville. They'll get you straightened out in a heartbeat.