anyone have an old canfield c2 direct mount stem?
- Thread starter englertracing
- Start date
just curious, what's the reason?
Need lower bars on new build without going -rise xc bars.
Yeah it doesnt look great
Flat bars not low enough? Just curious on the setup if it has that much height in the front end
i finally found a 26" XC fork that is both straight steerer and thru axle. took me months to find something with a long enough steerer. building up my old yeti
Haha yes
I'm in Poland, our distributor won't help You, I can get one for You if needed.
If you can find an older Thomson version, they are quite low.
Yes i saw those too ugly and only a tiny bit lower than what i have.
is you have 35mm bars this is available....
www.backcountry.com
FSA DC Gradient Oil Slick Stem - Bike
Buy the FSA DC Gradient Oil Slick Stem online or shop all Bike from Backcountry.com.
www.backcountry.com
I saw these as well.
The best looking is the canfield imo
Might have to get on the mill and make a lower version
Cmon The canfield looks nice enough
Kind of reminds me the Straitline stem.
Which they apparently still have some for sale, for a whopping $30. Too bad no zero rise ones for you though.
www.straitlinecomponents.com
Which they apparently still have some for sale, for a whopping $30. Too bad no zero rise ones for you though.
Boxxer (DM) Stems
Boxxer (DM) Features: Fits most Boxxer direct mount standard forks incl. FOX & BOS 31.8mm handlebar clamp Available in 28mm & 50mm lengths 25mm-25.5mm, 50mm-19.mm rise (measured from top of crown to center of handlebar bore) 128g-28mm, 138g-50mm 100% CNC machined from solid 6061 T6 aluminum...
www.straitlinecomponents.com
holy cowKind of reminds me the Straitline stem.
Which they apparently still have some for sale, for a whopping $30. Too bad no zero rise ones for you though.
Boxxer (DM) Stems
Boxxer (DM) Features: Fits most Boxxer direct mount standard forks incl. FOX & BOS 31.8mm handlebar clamp Available in 28mm & 50mm lengths 25mm-25.5mm, 50mm-19.mm rise (measured from top of crown to center of handlebar bore) 128g-28mm, 138g-50mm 100% CNC machined from solid 6061 T6 aluminum...
I have one of these if you're interested:
wow, I finally decided to get rid of mine in an effort to clear out the parts bin...only to find out you can get a new one for the same price. oh wellKind of reminds me the Straitline stem.
Which they apparently still have some for sale, for a whopping $30. Too bad no zero rise ones for you though.
Boxxer (DM) Stems
Boxxer (DM) Features: Fits most Boxxer direct mount standard forks incl. FOX & BOS 31.8mm handlebar clamp Available in 28mm & 50mm lengths 25mm-25.5mm, 50mm-19.mm rise (measured from top of crown to center of handlebar bore) 128g-28mm, 138g-50mm 100% CNC machined from solid 6061 T6 aluminum...
whats the opinion of the smart ppl on putting a dc fork on a carbon frame originally not designed to take one structurally wise?
i‘ve seen a few kenevo sl with dc forks but specialized says thats a no no
i‘ve seen a few kenevo sl with dc forks but specialized says thats a no no
Hmmmm.
Its hard to say.
My frame says ok to dc
Was about to do a tyee that said no....
A boxxer 35 or my morc is likely closer to a zeb or 38 than a 40 so???
@sethimus
Last gen Ransom is ok for dual crown from renowned sources
@englertracing
Now that you mentioned morc I can make sense of the clear stanchions with modern lowers. It looked disturbing at first
Last gen Ransom is ok for dual crown from renowned sources
@englertracing
Now that you mentioned morc I can make sense of the clear stanchions with modern lowers. It looked disturbing at first
Its the only morc on the new lowers as far as i know.@sethimus
Last gen Ransom is ok for dual crown from renowned sources
@englertracing
Now that you mentioned morc I can make sense of the clear stanchions with modern lowers. It looked disturbing at first
That’s the expert advice I was after, thanks