Quantcast
  1. The site migration has been completed successfully from vBulletin to XenForo. Please be patient with the site speed until we have finished rebuilding all of the caches - it may take a few hours. If you had previously linked your Facebook account, you will have to set it up again.

    Click here for more information.
  2. The new Classifieds are in place! The goal was to provide the best balance of usability and convenience - many liked the forum system, but some preferred the granularity of the newer classifieds. Hopefully this provides a good balance.

    Sorry, data was not migrated from the old system. Please re-list your items.

    Check out the new Classifieds here!

shrader Thread tool

Discussion in 'The Shop' started by olekdh, Aug 3, 2011.

  1. olekdh New Member

    Rep  |  Likes:
    0   |   0
    Joined:
    Aug 30, 2008
    Messages:
    4
    Hi everyone I'm searching for thread tool for shrader valve (inner thread). I'm not familliar with this sort of things. I just know some dimensions like those from wikipedia:
    Internal thread (to accept the threaded valve core)
    Metric: 5.30 mm OD × 0.706 mm pitch
    Imperial: 0.209 in OD × 36 tpi.
    But I'm from poland so it's hard to find threading tool not metric standards.
    So if you know that kind of tool send me link to it so i maybe know what to search for
    #1 Aug 3, 2011   
  2. JustMtnB44 Member

    Rep  |  Likes:
    0   |   0
    Joined:
    Sep 13, 2006
    Messages:
    629
    Location:
    Pittsburgh, PA
    #2 Aug 3, 2011   
  3. olekdh New Member

    Rep  |  Likes:
    0   |   0
    Joined:
    Aug 30, 2008
    Messages:
    4
    I need to drill and thread new holes for airspring so that tool you gave me in link above will not do the job. I need tap. Thanks for reply anyway, good start for my search
    #3 Aug 3, 2011   
  4. johnbryanpeters Hero

    Rep  |  Likes:
    2   |   0
    Joined:
    Sep 27, 2001
    Messages:
    16,711
    Location:
    Making moss sad in New Haven, Vermont
    The standard Schrader valve has the following threads:

    External thread
    • Metric: 7.7 mm OD, thread root diameter is 6.9 mm × 0.794 mm pitch.
    • Imperial: 0.305 in OD, thread root diameter 0.271 in × 32 tpi (threads per inch)
    Internal thread (to accept the threaded valve core)
    • Metric: 5.30 mm OD × 0.706 mm pitch
    • Imperial: 0.209 in OD × 36 tpi.
    #4 Aug 3, 2011   

Share This Page