Quantcast
  1. XenForo is here. Problems or comments on the new site? Please report them.
  2. New stuff: Our new Classifieds have launched. Check them out!
  3. New stuff: You can now tag users in posts using the @ symbol, and they'll get a notification that they've been mentioned. Try it out.

Converting to 1x10

Discussion in 'The Shop' started by urbanbiker45, Mar 10, 2012.

  1. urbanbiker45 New Member

    Rep  |  Likes:
    0   |   0
    Joined:
    Jul 2, 2008
    Messages:
    19
    Hi All,

    I have a 2011 sram X9 2x10 crankset. I would like to convert my drivetrain to 1x10. All I need to do is change the sram crankset to 1x10, but I need to have a 104 bcd with the bashguard I will be using. Is there any available spider on the market that will work? Like I said, I cannot do the proprietary sram 120 bcd.

    I saw the sram triple spider and the sram 1x10 conversion kit on the sram website, but, from my research, they are not yet available to the public.

    Please advise, it will be much appreciated.

    Cheers!
    Sam
    #1
  2. urbanbiker45 New Member

    Rep  |  Likes:
    0   |   0
    Joined:
    Jul 2, 2008
    Messages:
    19
    Any suggestions?
    #2
  3. urbanbiker45 New Member

    Rep  |  Likes:
    0   |   0
    Joined:
    Jul 2, 2008
    Messages:
    19
    Any takers? Would greatly appreciate some thoughtful replies.
    #3
  4. VMARTINEZ Member

    Rep  |  Likes:
    0   |   0
    Joined:
    May 23, 2005
    Messages:
    271
    Home Brew components, MRP, Middle Burn all make a single ring for those cranks.
    You just take off the lock ring pull off the two rings and install the single ring. Put the lock ring back into place.
    There you go.
    VM
    #4
  5. urbanbiker45 New Member

    Rep  |  Likes:
    0   |   0
    Joined:
    Jul 2, 2008
    Messages:
    19
    Thanks for the reply. I have a 104 bcd chainring I need to run. I am looking for a type of spider that can convert the sram x9 2x10 crank into a 1x10. Thanks.
    #5
  6. urbanbiker45 New Member

    Rep  |  Likes:
    0   |   0
    Joined:
    Jul 2, 2008
    Messages:
    19
    If someone knows about this, please chime in. If someone knows there is no current solution, please chime in as well. Thank you.
    #6