Quantcast

forks

  1. I

    Diagnosing blown compression cartridge in 2011 Marzocchi Bomber 66 RC3 Titanium

    I went for a ride the other day and when I got home and was cleaning my bike I noticed a large amount of oil leaking from the rebound adjustment knob on the top left, and the compression adjustment on the bottom left of the fork. The rebound still feels normal the only thing that was weird was a...
  2. smittybit

    SID RCT3 Dual-Air Tuning Guide

    There seems to be no guides out there that show how to tune the SID RCT3 Dual Air forks properly, so here's mine, YMMV (But I hope this helps save lots of time for others. Right off the bat, I have to say these have been bar none the hardest forks I've owned to dial in properly, seriously; I've...
  3. X KENT X DAN

    New to this Just Brought GT Tempest 2.0 2009 Want to replace forks

    hello just wondering if anybody could help me i have just brought a GT tempest 2009 and was wondering about the forks RST Launch T8 they dont seem best for crosscounty would like some help but not the pricey as im a begginer Thanks
  4. Rapplez

    '12 Fox Float 32 150 FiT or '11 Rock Shox Revelation 120/150

    Im in the process of building up a sub 25 lb all mountain bike. I weigh 130 lbs and I need some help and input on which fork I should strap on the front of my new steed. My choices include: 2012 Fox Float 32 w/ Fit 150mm. Fox is Fox, they're very dependable, and very innovative. But weight...
  5. U

    DART 2 Problems

    I have a pair of new DART II front forks on my Gary Fisher, and i've noticed that after some beating on the downhills it starts to lose about half travel, and sags to about 50% when I'm sitting on it. When i ride out flat for a while, it goes back to normal. Is this a problem or defect? I...
  6. myles3a

    Help! How to convert my 20mm axle?

    I have a 20mm hub and axle on my current front wheel. But with the recent purchase of my new fork and it was a downgrade. It does not fit 20mm axle. It only has 9mm drop-outs. Is there a way i can still keep that 20mm hub but have a 9mm axle for my new fork? Thanks for the help
  7. J

    Marzocchi 66 bushings - how can I fix them?

    Hi, I'm new here but reliably(ish) informed it's the place to go for tech advice so here goes. I am the sorry owner of some Marz 66 RCVs and as most folk know the bushings aren't even made right to start with. So what can I do to stop them knocking? I'm in a pretty industrial area so could...
  8. K

    Which Forks!!

    Im building a new turner DHR but i am stuck at the ultimate question... What fork do i run?!?!?!?!? Boxxers or 40's.. so if anyone can give me there input/ post some pics of your rides with boxxers or 40's would be sick!!! thanks
  9. N

    Forks - help!!!

    I have a 1995 GT Zaskar LE (ridgid) that has been sitting in my garage since I left the UK in 2001. We have recently been reunited and I'm really enjoying riding it again. It is as super light, super fast as strong as I remember it. I would like to add some light weight forks to the front of the...
  10. N

    1995 GT Zaskar LE - Question!

    I have a 1995 GT Zaskar LE (ridgid) that has been sitting in my garage since I left the UK in 2001. We have recently been reunited and I'm really enjoying riding it again. It is as super light and super fast as I remember it. I would like to add some light weight forks to the front of the bike...
  11. R

    Marzocchi Z1 QR20 Fork 2004

    I recently bought a mountain bike with a Marzocchi Z1 QR20 Fork (2004). I´ve been having trouble keeping the rebound control. I have to readjust the ETA system every time I use my bike and it´s becoming very inconvenient. I may be adjusting it wrong?? Also, when I'm riding and make quick...