What happens is, the compression fitting doesn't get torqued correctly, or the compression olive gets installed wrong, which causes the line to pinch or get blocked by some similar happenstance. Thus, resulting in the lever locking up.
When I went, we stayed here (http://www.hebergementmontsainte-anne.ca/) which was pretty nice.... Though it has been several years. Right in the base area though.
Make sure when bleeding the line, the bleed ports are the highest point of either end of the line. Also, make sure the rebound speed adjust on the remote is in the full slow position. While pushing fluid from one end to the other, cycle the button on the remote a couple times to make sure to...
You can get a Fox for the bike, but the stock Vivid does have a custom light compression tune to accommodate the frame. Same would have to go for the Fox.....
When I fractured my back, there wasn't really any discussion on the DH circuit about neck braces. There was one guy who wore a neck doughnut in our local series, but that's all I ever remember seeing. This was 2002.
My injury wouldn't have been prevented from wearing a neck brace, and whether...
I would guess one of two options.
1. the IFP was set to the wrong depth and is bottoming out before the shock reaches full extension
2. the bushing in the seal head is not to spec and so doesn't shut down the oil flow enough for the hydraulic top-out to work
The latter seems less likely since...
Pull off the freehub body, clean it out, and re-lube it with mineral oil.... Make sure to get some on the main seal too, that should help a lot. Mavic freehub bodies require a lot of attention.
It's probably sluggish because of oil in the lower part of the talas assembly..... relatively easy to remedy, though it does require cracking into the talas....
Double Barrel (all settings are from full open)
High Speed Rebound 2.25 Turns
Low Speed Rebound 11 Clicks
High Speed Compression 1.5 Turns
Low Speed Compression 5 Clicks
300lb x 2.5 Spring
Bike is 2013 Transition Covert, shock is 8.5x2.5"
Thanks, I actually wound up making one....... I got a newer one and modified a second random shimano adapter to make one working adapter.... Not TOO ghetto, I guess.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.