Evil Undead

[ianjenn]

nahhh ....i just have two...

So for each Testicle unless you are pulling a Lance on us?

[Ian Collins]

So for each Testicle unless you are pulling a Lance on us?

funny you mention that...i did have this surgery a while back...ha

[ianjenn]

Went to school with a guy in 7th grade he fell about 25-30 feet off a rope-swing onto a pile of firewood. He was left with just 1 after that.

[Thiessen]

I'm trying to confirm if my frame is in the slack or steep setting. if sitting on the bike normally and the slack arrows are pointing back towards me. Is this the slack or steep position?

[Udi]

Both of the arrows facing forward (away from you when sitting on bike) indicate your setting. Steep arrows facing forwards is the default position, which indicates the steep HA setting - which is what your bike is currently in.

Both cups need to be removed and installed after rotating 180deg for slack setting.

[William42]

Kinda off-beat run.
Loving the bike so far.

But how does it handle eastcoast rox, which are scientifically more gnar

[Thiessen]

Thanks for the confirmation Udi. wasnt the answer i was hoping for haha. oh well easy fix.

[BrazilianMonkey]

please, im using Undead with CCDB air, but i dont get full travel, even with 40% SAG, i like to use no more that 30%, i will change to XV air Can, anyone know if its fits? i noticed that my regular CCDB air is too close to air valve

And anyone try this XV CCDB, how does it fell?

thanks for all

[gretch]

please, im using Undead with CCDB air, but i dont get full travel, even with 40% SAG, i like to use no more that 30%, i will change to XV air Can, anyone know if its fits? i noticed that my regular CCDB air is too close to air valve

And anyone try this XV CCDB, how does it fell?

thanks for all

The XV air can is not available yet... I was told late March or April timeframe.

[Juddos]

Im getting full travel on my undead with ccdb air. 30% sag.

I also run 2 small spacers in the air can..

What settings are your adjustaers at...?

[tabletop84]

Some guys over at mtb-news.de are arguing that the air-port between the air-chambers is too small therefore they make it bigger:

http://www.mtb-news.de/forum/showpos...4&postcount=87

[Udi]

please, im using Undead with CCDB air, but i dont get full travel, even with 40% SAG, i like to use no more that 30%, i will change to XV air Can, anyone know if its fits? i noticed that my regular CCDB air is too close to air valve

Unrelated to your question, but have you considered running a coil shock? The Undead is fairly progressive at end of stroke and would likely perform better with a coil shock, even though many people are running the CCDB air in progressive bikes.

I found the frame worked great with a little less than 30% sag, I think 40% is excessive. By all means try the XV can (maybe Kevin can tell you if it fits, email him), but I'd suggest trying a coil shock sprung for 28-30% sag at some stage if you get the chance.

[puppy]

Udi thank you for advice . I think to change CCDb air but I don't want to change it and sell now

[Udi]

Haha, by all means try it out if you've already purchased it!
I just don't think it would be the most ideal shock for the frame, that's all.

[juanbeegas]

Hey guys, I'm not trying to be a jackass here, but does anyone have an undamaged Undead box? I really like the illustration and was thinking of getting it framed up.