Type: Posts; User: bengxe; Keyword(s):
Mine was at Windham in 2012. World Cup weekend. I crashed in practice and bruised my hip pretty good, I barely survived my race run. I was basically dead last. I haven't raced since, but I plan...
How is it any different? Isn't the linkage and rear triangle the same?
The 08 and 09 have 17.1 chainstays, the older ones are 17.3. I've also read that the 08-09s were lower and slacker, but I don't know what the numbers are. You can also run an 8.5x2.5 shock to lower...
They only sag when they're broken. Which is often it seems. My hilo sl was good while it worked, which was for about a month.
I went from a 5" post to a 4" post when my hilo started leaking. More travel is better. Measure how much exposed seatpost you have at your ideal pedaling height and check the collar to seat clamp...
Does the process use 6mm shock hardware? That's the only way you'd get 3mm of offset. It might be simpler to shorten the ccdb 1/4"
Looks flexy. I hope you don't have to go that far to fit an rc4. I left most of the biggest bridge in to clear my vector hlr.
The most common source of play in the lower link is an easy fix with bearing retainer compound. The bearings tend to last a long time and are still easy to find. The Sunday is still one of the best...
I ordered a set last week. 115 a side with metal/ finned pads is a steal.
They don't come with rotors, so you can use the same adapters as whatever you're running now.
Iron horse sunday - dh
Blur 4x - trail
eastern night train - dj
Diamondback assault - bmx
Giant ocr - road
I could easily go without everything except my trail and Dh bikes. If I had to go to...
Chainstay/ seatstay. Cs is the lower link, ss is the upper.
36 11-23 here.
I run a road cassette because it was a cheap way to drop a lot of weight from a heavy bike. I agree with you about the gear spacing, though, I tend to shift 2-3 gears at a time. ...
The way I understand rebound tuning, there's no difference between position sensitivity and speed sensitivity. Since the spring is providing the rebound force, the position determines the shaft...
I think its safe to assume he meant from full open. Fully closed LSC would feel terrible on a sunday
If you dont feed it, it'll eventually go away.
Lol. Keeping all your fingers on the grips isnt a fashion statement.
Obviously no one's literally measuring from their hands to either of their feet, but that distance is the most important factor in fitting a dh bike. As far as frame geometry goes, center of bb to...
Hand to foot measurement matters a lot more than headtube length.
Half of them are turned the right way. Thats better than the original version.
I have hope floating rotors, shimano m785 calipers, and north shore billet adapters on my sunday. Required no grinding or spacers. The NSB adapters are slightly thinner than the standard shimano...
The bend of the Thomson dh bars felt awful to me in the couple minutes I spent one. I've also only used 9/5 bars. It was distracting, I couldn't enjoy the bike because of how terrible the bars...
Frame/Shock: Sunday/ Vector air
Rear Sag %: 27%
Shock stroke 3"
Frame travel: 200mm
Sag measured with riding gear?: Yes, mostly
Sag measured standing/sitting?: Standing
Yea, nobody. They never made the 6point in XL.