Search:

I have put a crap load of air/fuel ratio sensors in Subaru.Fuel trim will be off,lambda will not pass through 1.0,(Front o2 sensor is a Air/fuel ratio sensor)
AFR sensor gets stupid(Biased is the...

Timing Chains have gotten very tiny nowadays,I've done several Nissan and Hondas for cam Synch codes this past year,No Subies yet have developed Chain trouble(Most of our customers still on Belt...

Yea,don't run a spring w/o any preload,didn't know,must be a fairly stiff spring? Anyway,just have your present shock shortened. I used to run extra sag in my Stinky's to get the geometry good but...

Don't spend money on a shock,first I'd just back off preload another 1/4",that would be the same as a 1/4" shorter shock,wouldn't it?
Can't imagine it would negatively affect quality of ride on...

Seems like it'd be awfully close to T.T.C. Why not just work with them to improve what they got? Can't be a bad thing to have more venues but you may be trying to spread available manpower pretty...

Before you go to the extreme of surgery one thing to consider is your gloves,back in the mid 90's I raced alot of harescrambles and being a auto mechanic my hands never got a break all week,I had...

Voter #148:D

Will there be anyone there this coming sunday? I'd like to check out the course,haven't been down there since about 2004.

There are quite a few Demoes,Stinkies,Stabs on Pinkbike classifieds,You may have to contact a dozen before finding someone who will actually ship one to you,but should be doable for under $1500. I...

Trials Training Center just west of Chattanooga too.

Use Downhill as a motivation to get a good education,try to pick a field where you can work wherever you want to(some careers have to be tied to urban industrial locations,which aren't near...

Everytime I go on specialized website and compare Pitch Pro to Enduro Comp I end up clicking on Enduro Evo and stop right there...can't consider cheaper models...must save up money...(started by...

After seeing what is offered as automotive tires these days I ain't too impressed by tire engineers lately...treads chop up,tire are coarse,noisy POS no matter how much you spend on them(I actually...

It's most important to set the suspension for the best performance over the entire length of the course, If you don't use all your travel on some courses so be it. If you have one big jump that...

Those were very competitive around here,have a friend who ran top 3 or 4 every week on one,he actually dropped back when he switched to a Rickman-Zundapp.
I have dropped sixty lbs since january with...

Pics of you 125 please!(Or at least tell us what it is)

First race oct 11
http://www.siegecraftnw.com/VDR.htm


PNW has an awesome vintage scene
Washougal is spectacular...
...

I remember seeing a parallelogram setup way back in the seventies on a Kawasaki MX bike tried by the factory riders,and boyeson built a rear swing arm setup that moved the pivot point to effectively...

PM sent:)

Here on the States my GF went to the doctor with shoulder pains,they sent her to get a MRI(scan) within the hour.You get what you pay for...
(cost her 180us,insurance picked up the rest)

I know...

I guess it's quite possible that a square profile tire might just be the best for your conditions,when leaned into a turn it would present a narrow contact area that could knife down into the soft...

Mobster wasn't a good front tire choice for me,square edged profile would wash out suddenly when cranked over in a turn.I switched to a soft compound High Roller in the front and never pushed the...

Nope,sorry,had to make room for unimog rockcrawler pics
http://home.insightbb.com/~d.may/mog33.JPG

It's pretty damn easy to shorten a ssv or ssvf damper rod marzocchi,take it apart and add 1/2"...

Unfortunately I just sold my Primo to a guy in cincy,had ta pay the feds alot of tax money this year.
That's ok,I'll just ride my Chute until the '05 come out and get a sweet new one.
Mass produced...

It's very easy to shorten the travel on Jr-T's,just make some 40mm spacers to go on the damper rods in addition to the top out springs and remove the shorter of the two main springs,then make some...

Ya know,I think the whole gay marriage thing is really about family law attorneys increasing their available client pool...