Search:

I have hope floating rotors, shimano m785 calipers, and north shore billet adapters on my sunday. Required no grinding or spacers. The NSB adapters are slightly thinner than the standard shimano...

The bend of the Thomson dh bars felt awful to me in the couple minutes I spent one. I've also only used 9/5 bars. It was distracting, I couldn't enjoy the bike because of how terrible the bars...

Frame/Shock: Sunday/ Vector air
Rear Sag %: 27%
Shock stroke 3"
Frame travel: 200mm
Sag measured with riding gear?: Yes, mostly
Sag measured standing/sitting?: Standing
Fork: 888rc2x
Sag: 18%...

Yea, nobody. They never made the 6point in XL.

I dont remember the number right now, but I've answered that same question in this thread before. All medium sundays should have the same geometry.

Size?

One more:
http://gp1.pinkbike.org/p4pb8989597/p4pb8989597.jpg
This was my 2012 ride, also. I'll probably ride it til it breaks.

Sirius question? Don't put cables between bumper and frame?
Edit: just realized you have a Sunday. The bumpers should be hitting the top tube, it sounds like you might have them on the gusset.

I guess you could swap them, but you probably want the axle to go out the non-drive side.

I wouldnt worry about the bearings. Ive never gone without the cover on my works headset but I have on a few others. Just use enough spacers to keep the crown off the upper cup.

Its more important that there arent any gaps in the compound when you apply it, you can clean up the excess after you put it back together. I put it on both the axle and the link, and mine has...

He has, search this thread.

http://www.licycleworx.com/IH_Sunday_Rear_Triangle_Pivot_p/ihpiv-sunrtpiv.htm

Loctite 609 will fix that.

No. The sunday is a downhill bike.
If you want to be competitive youd be better off on a lighter shorter travel bike, but theres no reason you couldnt have fun on the sunday. Lighter wheels and...

Isn't the rwc kit only about $40? Am I missing something?

The reach on my medium sunday is about 37cm. The effective top tube is about 56cm.

The League

You mostly hear about cracked rear triangles on those bikes, it should be easy to find an un-cracked front triangle.

To be fair, your post was long and rambly, and everything bike-related on this forum belongs in the DH section.

Ill be there saturday. Does anyone know which two trails will be open?

No, short shocking is not a good idea. The fender mount bridge on the rear triangle almost hits the front triangle at bottom out of a 9.5x3, so you cant go any lower than that. If you went to a...

How do you have xtr cranks on an 83mm bb?

You should start by reading through this thread.
1. The Sunday geometry was definitely ahead of its time. With an angled headset they can be very similar to modern bikes.
2. No, many people have...

E clips aren't very expensive, maybe go to the hardware store and buy a few different sizes? Or measure and just get the right one?