Udi
Turbo Monkey

Hello Udi!

could you please send me the CCDB service manual to : katsooba@gmail.com
it would be great!
doest it also cover the CCDB-A service?
thank you!

your ridemonkey inbox is full....!

sorry but i have not a problem with the wight of the hole zerode, i have a problem because i can't handle the fat of the alfine part on the bike... and the dam shock downside.. but otherwise it rides sweet. i hit the alfine part any crank turn whit the shoe pants and legs..
the difrenz is 1.7Kg same build kitt.
17.3kg
19kg

Hi Udi,
Witch company do you work for?
Can i send me your info so i can get a rebuilt from you?

Hi Udi,
I have a Stoy mounted on a Banshee Legend witch i like but found some disadvantages (top out) with the shock and apparently i don't run the correct valving (i have the ST-01 instead of the ST-02 according to Bos). I need your advise because you are the only one i know who seems to know this shock in North America.

Carl

udi, thanks for all your helpful posts. I am putting together a beater for friends to ride, and have a progressive 5th that has no rebound damping (boing) I found a thread from you where you described the air chamber collapsing and keeping the rebound circuit wide open.

I am not scared of rebuilding forks or shocks, Can you help me to figure out how to open this air shock up? I cant find a writeup or instructions anywhere online - thanks!

Udi,

I first want to thank you for all the great tech tips and info that you provide in a clear and professional manner.

My question is, what would cause my 2011 Boxxer R2C2 to use only 7" of travel. I did the following trouble shooting based on what made sense to me:

1. I removed the spring stack and still only had 7" of travel
2. I removed the dampener cart. and still the same
3. I drained the lubricating fluid from the spring side and I was able to get full travel.

My thoughts are that there was too much oil in the lowers on the spring side causing it to hydolock, is this right or even possible?

Thanks

Chris

Hi Udi,

Any chance of sending me that CCDB service manual?

CCDB service manual
http://www.ridemonkey.com/forums/sho...28&postcount=3


Hi Udi,

may I ask you to send me the CCDB service manual (*.pdf file) via e-mail ulf.deml@web.de?

THX a lot and kind regards to Switzerland from Alemania

saw your post about half way , i did that and it felt so much better , i run quite a bit of lsc 8 to 9 clicks , but i weigh 250lbs on a blue spring also, i was running 6 to 7 clicks before i burped it but had to bump up the lsc a little, does this sound right??
i like to have my fork run high in its travel, and save it for big bumps