View Full Version : eastern traildigger 26?
cully
02-12-2008, 09:36 AM
This is a crazy looking bike basically a 26in cruiser with modern geometry. sorry if this has been posted before but I never noticed it.
http://eastern26.com/Products/Complete/LargePhotos/TD26White.jpg
also anyone got specs on the 2008 nighttrain or the 2008 thunderbird, what are the differences?
Cru Jones
02-12-2008, 09:57 AM
Yeah, those things are kinda crazy looking. Kinda rad, too. Satori had a post about 'em, but it was mostly about the 24" version. We were hoping the 24 would finally be the answer to what some of us have been looking for in the freestyle cruiser department. Our biggest beef with it was that it's not full chromo. Here's the 24...
http://www.easternbikes.com/a/products/completes/2008%20Completes/2008CompletesLarge/TD24Black.jpg
ebrider510
02-12-2008, 11:14 AM
wonder if they will be available in the US?
cully
02-12-2008, 11:20 AM
correct me if I'm wrong but I think all eastern stuff is available in the US especially since they're based in NC.
ebrider510
02-12-2008, 01:06 PM
correct me if I'm wrong but I think all eastern stuff is available in the US especially since they're based in NC.
yes that would make sense. i wasn't sure though because these bikes were originally discovered on some site based out of New Zealand unless i'm mistaken. but, after a quick look at easterns BMX site, they are now added to the line up. i'm hoping we will see these for sale soon. maybe i'll end up with one..although i'd probably end up needing to upgrade most of the parts. my friend had an 07 traildigger (20" obviously) and it was actually a solid bike from the start, but it needed some upgrades over the first few months. the frame was heavy but not horrible. mite have to think about this
brycexlighthall
02-12-2008, 06:09 PM
eastern26.com brosephs ... get into it.
A Grove
02-12-2008, 07:10 PM
I can't find them on sale anywhere though.. preferably the 24.. but not even the 26?
BikeSATORI
02-13-2008, 04:27 PM
yeah, unfortunately they are on the same bottom level as their "Traildigger" 20"ers. non-sealed, not full chromo. Still might be fun though if the geo. is half decent, or at least shorter out back than the current crop of lower class dj cruisers retrofitted with race geometry.
I did post a brief thread about this a few weeks ago though:
Eastern Traildigger cruisers (http://www.ridemonkey.com/forums/showthread.php?t=195643)
(Look at the "Similar Threads" box at the bottom of your screen too. ;))
They are already for sale in Australia, so even though Eastern is an American based company, not all products are actually sold within the US at the same time apparantly.
This info isn't found on Eastern26.com as far as I know now, only on their bmx site, which I thought was a bit odd, could go either way I guess.
rowlands
02-13-2008, 04:38 PM
heres what i got off the site
http://www.easternbikes.com/a/products/completes/2008%20Completes/HTML/2008TD26.html
Were you born with freakishly long legs? No, no-don’t join the circus, get an Eastern Traildigger 26. This bike has the “out of this world” quality that you’ve come to expect from Eastern. We’re talking about the new Raptor Cranks, a One-Piece Chromoly Driver, and our New Pinner Seat. What else do you need?? Get out there and hit the trails-or the Quickie mart….which ever you prefer.
Chromoly downtube
100% chromoly fork
Toptube: 21.75"
Chainstay length: 15.5"
BB height is approx. 13"
Internal headset
Integrated seat clamp
Eastern Raptor 3 piece chromoly cranks
Eastern Rib grips
BiRectional hub with 12T driver
Double walled rear rim
Weight: 29 pounds
Colors: Black, White or Orange
and 24
http://www.easternbikes.com/a/products/completes/2008%20Completes/HTML/2008TD24.html
Everybody in the world knows about the quality and value that comes with the “Traildigger” name-even your momma. Well, we may not have told her about it but man does she need to know! The Traildigger 24 has a Chromoly top and down tube, our brand-new Raptor Cranks and a 9-tooth hub that’s (do you freakin’ believe this?) convertible from right-hand to left-hand drive without any extra parts! If you’re a taller guy or if you just don’t feel right on a BMX bike-go try out the 2008 Eastern Traildigger 24. You’ll be glad you did.
Chromoly downtube
Chromoly fork
Toptube 21.6"
Internal headset
Integrated seat clamp
Eastern Raptor 3 piece chromoly cranks
Eastern Rib grips
BiRectional hub with 10T driver
Double walled rear rim
Weight: 29 pounds
Colors: Black, White or Orange
brycexlighthall
02-13-2008, 05:53 PM
I know they are waiting for a big shipment from Taiwan, it should be here the end of the month. Jenson usa . com the '07 night trains for $899 right now (different geo than '08). My Black Betty frame is supposed to be identical geo to the night trains, sub 15" chainstay should be fun. So I guess we'll have to wait a bit longer.
cully
02-14-2008, 09:37 AM
what's the difference between the nighttrain thunderbird and black betty? black betty is just a fame? are they all the same frame?
NightTrain appears to be 1" longer than the Thunderbird....
15.3" stays !!
-
FRAME: Eastern NightTrain 26", Full Crmo, Spanish BB, Internal Headset, Removable Gyro Tab Holes (even though no gyro).
SIZES: 23.5" T/T, 15.35 chainstay, 72 degree headangle
FORK: RockShox Argyle 318, 80mm, 20mm thru
HEADSET: Internal Headset
CRANK SET/ CHAINWHEEL: Eastern Stealth Crank/ Medusa Light 25t Sproket
BB-SET: Eastern Spanish BB
HANDLEBAR: Eastern Chromo 1.6t
STEM: Eastern Choker
GRIP: Eastern Rib Grips
HUB FRONT: Sealed Bearing 32H , with disc mount, 20 MM axle
HUB REAR: Eastern MTB single speed cassette hub 135mm, 14mm axle, 36H, 12t one piece driver, with disc hub mt.
RIM: WTB Laserdisc FR, 32h, anodized Black, 585g
SPOKES: 2.0mm Stainless steel 14G UCP, black, with brass nipples
FRONT TIRE: Kenda Small Block 8, 26x2.35
REAR TIRE: Kenda NPJ 1052, 26x2.10
REAR BRAKE: Avid Juicy 3, 6" Rotor
BRAKE LEVER: Avid Juicy 3
CASSETTE: 1 Piece 12T Driver, 6 paw
CHAIN: KMC 510HX
SADDLE: Eastern Pinner
SEAT POST: Eastern Aluminum
SEAT POST CLAMP: Intergrated
PEGS: 1 pair Eastern Byrd Pegs
PEDALS: Eastern Dual-Concave Pedals, loose ball bearing
COLORS: White or Black
-----------------------------------
THUNDERBIRD
FRAME: Full Chromoly, Spanish BB, Internal Headset, Removable Gyro Tab Holes(even though no gyro)
SIZES: 22.5" T/T, 15.35" chainstay, 72 degree headangle
FORK: RST Space Free, Coil Spring/MCU, 80mm, Crmo Steerer
HEADSET: Internal Headset
CRANK SET/ CHAINWHEEL: Eastern Raptor Cranks, 175MM with Eastern 25T Medusa Lite Sprocket
BB-SET: Eastern Spanish BB
HANDLEBAR: Eastern Steel 2.0t
STEM: Eastern Choker
GRIP: Eastern Rib Grips
HUB FRONT: Eastern Sealed Bearing 32H , with Disc Mount, 20 MM axle
HUB REAR: Eastern MTB LB-9 single speed cassette hub 135mm, 14mm axle, 36H, 12t driver, with disc hub mt.
RIM: Wienmann HL32, Kinlin BM25
SPOKES: 2.0mm Stainless steel 14G UCP, black, with brass nipples
FRONT TIRE: Kenda Small Block 8, 26x2.35
REAR TIRE:Kenda NPJ 1052, 26x2.10
REAR BRAKE: Winzip disc 6" rotor
BRAKE LEVER: Tektro ML-570
CASSETTE: 1 Piece 12T Driver, 6 paw
CHAIN: KMC 510HX
SADDLE: Eastern Pinner
SEAT POST: Straight
SEAT POST CLAMP: Integrated
PEGS: 1 pair Eastern Byrd pegs
PEDALS: Wellgo LU 313, Molded Pin
COLORS: Light Blue or Black
Bryan67
03-03-2008, 09:51 PM
I just both of them at a local shop here. They look pretty cool at $450.00. Too low profile for me and it at least tri moly would be nice though.
robbietaylor
03-05-2008, 05:04 PM
rode it today and loved the 26.
blood sweat and gears bike shop got them in.
located in denver NC
go there! and check them.
BikeSATORI
03-05-2008, 06:33 PM
NightTrain appears to be 1" longer than the Thunderbird....
15.3" stays !!
-
FRAME: Eastern NightTrain 26", Full Crmo, Spanish BB, Internal Headset, Removable Gyro Tab Holes (even though no gyro).
SIZES: 23.5" T/T, 15.35 chainstay, 72 degree headangle
FORK: RockShox Argyle 318, 80mm, 20mm thru
HEADSET: Internal Headset
CRANK SET/ CHAINWHEEL: Eastern Stealth Crank/ Medusa Light 25t Sproket
BB-SET: Eastern Spanish BB
HANDLEBAR: Eastern Chromo 1.6t
STEM: Eastern Choker
GRIP: Eastern Rib Grips
HUB FRONT: Sealed Bearing 32H , with disc mount, 20 MM axle
HUB REAR: Eastern MTB single speed cassette hub 135mm, 14mm axle, 36H, 12t one piece driver, with disc hub mt.
RIM: WTB Laserdisc FR, 32h, anodized Black, 585g
SPOKES: 2.0mm Stainless steel 14G UCP, black, with brass nipples
FRONT TIRE: Kenda Small Block 8, 26x2.35
REAR TIRE: Kenda NPJ 1052, 26x2.10
REAR BRAKE: Avid Juicy 3, 6" Rotor
BRAKE LEVER: Avid Juicy 3
CASSETTE: 1 Piece 12T Driver, 6 paw
CHAIN: KMC 510HX
SADDLE: Eastern Pinner
SEAT POST: Eastern Aluminum
SEAT POST CLAMP: Intergrated
PEGS: 1 pair Eastern Byrd Pegs
PEDALS: Eastern Dual-Concave Pedals, loose ball bearing
COLORS: White or Black
-----------------------------------
THUNDERBIRD
FRAME: Full Chromoly, Spanish BB, Internal Headset, Removable Gyro Tab Holes(even though no gyro)
SIZES: 22.5" T/T, 15.35" chainstay, 72 degree headangle
FORK: RST Space Free, Coil Spring/MCU, 80mm, Crmo Steerer
HEADSET: Internal Headset
CRANK SET/ CHAINWHEEL: Eastern Raptor Cranks, 175MM with Eastern 25T Medusa Lite Sprocket
BB-SET: Eastern Spanish BB
HANDLEBAR: Eastern Steel 2.0t
STEM: Eastern Choker
GRIP: Eastern Rib Grips
HUB FRONT: Eastern Sealed Bearing 32H , with Disc Mount, 20 MM axle
HUB REAR: Eastern MTB LB-9 single speed cassette hub 135mm, 14mm axle, 36H, 12t driver, with disc hub mt.
RIM: Wienmann HL32, Kinlin BM25
SPOKES: 2.0mm Stainless steel 14G UCP, black, with brass nipples
FRONT TIRE: Kenda Small Block 8, 26x2.35
REAR TIRE:Kenda NPJ 1052, 26x2.10
REAR BRAKE: Winzip disc 6" rotor
BRAKE LEVER: Tektro ML-570
CASSETTE: 1 Piece 12T Driver, 6 paw
CHAIN: KMC 510HX
SADDLE: Eastern Pinner
SEAT POST: Straight
SEAT POST CLAMP: Integrated
PEGS: 1 pair Eastern Byrd pegs
PEDALS: Wellgo LU 313, Molded Pin
COLORS: Light Blue or Black
Is this the Australian spec. ? Just wondering because I've seen quite a few factory pictures of Eastern26's, and most of them had the Kenda NPJ 2.1 on there... But I've never seen an Eastern26 in the US spec'ed with that tire yet. That tire hasn't been made available in the US, neither aftermarket or oem.
newrider3
03-06-2008, 07:26 PM
Just saw the Traildigger 24 on Dan's. They seem to have marked it down quite a bit from what the original site posted about it said, it is only $350.
This is a crazy looking bike basically a 26in cruiser with modern geometry. sorry if this has been posted before but I never noticed it.
http://eastern26.com/Products/Complete/LargePhotos/TD26White.jpg
also anyone got specs on the 2008 nighttrain or the 2008 thunderbird, what are the differences?
i rode an eastern traildigger 26 and it felt koooky. bars too low. bb too high. front end too short (toes hitting front tire in normal riding, not just x-ups).
i really wanted to be down with it. but no way would i ride that bike--at least in the stock setup.
vBulletin® v3.7.1, Copyright ©2000-2008, Jelsoft Enterprises Ltd.