who has 3'' riser bar

[bcd]

they want to sell? LOL

pm me.

[don]

bcd - your PM box is full.

[bcd]

bcd - your PM box is full.

clean now. thanks

[Tetreault]

i have an old axiom chromo bar thats just been sitting in the basement for a couple years now, id let it go for really cheap if your interested.

[bcd]

i have an old axiom chromo bar thats just been sitting in the basement for a couple years now, id let it go for really cheap if your interested.

how wide? bent at all?

[ThePriceSeliger]

Ditto... I would like one as well.

[t1maglio]

Who makes a decent set?

[ServeEm]

solid makes a nice bar, mine are nice and st8. some were skep before but they're holding up great.

[Hup]

I have some almost new SIC Chase bars (3" rise, 12 deg sweep, 25.4mm, 28") for sale.

http://www.mcgrathmediasolutions.com/images/bars.jpg

Make me an offer if you are interested.

Thanks,

J

[J-Dubs]

atomlab makes one too

[ThePriceSeliger]

I have some almost new SIC Chase bars (3" rise, 12 deg sweep, 25.4mm, 28") for sale.

http://www.mcgrathmediasolutions.com/images/bars.jpg

Make me an offer if you are interested.

Thanks,

J

I want... How much?

[quickfeet18]

I ordered gusset open prison bars the other day to go with a sweet bmx stem.

[Castle]

I ordered gusset open prison bars the other day to go with a sweet bmx stem.

where did you order the bars?

[BikeSATORI]

where did you order the bars?

you can get them through bti I believe.

They're not quite wide enough for me at this point though, at like 26.8" or something... Nice weights and rise though.


I'm actually wondering where I could just get some ~4" rise cruiser bars just to try out... Was looking at some old school S&M C4 riser bars, but they were super heavy and overbuilt...

[Castle]

yeah that 26.8" is a lil narrow... doesn't leave much option... kinda heavy too...

[quickfeet18]

yeah I got them from bti I am not too worried about the width wide bars suck for barspins and x ups

[v-digit]

dang, i'm still stuck in the old-school with my 24" blk mrkt 2" rise bars :) ;)

[BikeSATORI]

yeah that 26.8" is a lil narrow... doesn't leave much option... kinda heavy too...

if you think the open prisons are heavy, I don't think steel bars are for you. Those are among some of the lightest ones out there that I know of.

[t1maglio]

Lol, I just chopped my new bars to 23.5". I can't imagine leaving them at 28", but we have had this discussion before so I digress.

[Castle]

if you think the open prisons are heavy, I don't think steel bars are for you. Those are among some of the lightest ones out there that I know of.

do you know the weight of the nempros by any chance? I know the v.2's are around the corner...

[Evil4bc]

do you know the weight of the nempros by any chance? I know the v.2's are around the corner...

The V1's were 1.3lbs - 1.6lbs ? as I remeber in 29 width , Satori help me out here do you remember what they weighed ? Anyway they wernt light !

[BikeSATORI]

The V1's were 1.3lbs - 1.6lbs ? as I remeber in 29 width , Satori help me out here do you remember what they weighed ? Anyway they wernt light !

ahhhh.... man, I never write down all these numbers I get from weighing stuff.... I forgot what it was before I fill the ends with silencer holes too, haha... Something like 1lb 6oz I'll guess.

But man, c'mon, let's see some V.2's roll out with like 3.3+" rise as an option! whoohoo, all rigid runners rejoice! You know I'd be down for some Brad.

oh yeah, any word on my fly cups as of late? haven't seen or heard anything...

[Leethal]

I rode Alfred's bike with Folsom bars.. I liked them some things I would change though :brows:

I still get a little confused by the desire for much taller..

[Evil4bc]

I rode Alfred's bike with Folsom bars.. I liked them some things I would change though :brows:

I still get a little confused by the desire for much taller..

Sweet! AL's a good friend and his DeathMobile pretty sick .
Please shoot me a PM with your suggestion on the bars I'm always open to improvement .

Satori I got High Rise V2 3.25" Weezy Jefferson bars on the way , there at the Benders right now

[cmc]

. . . .
I'm actually wondering where I could just get some ~4" rise cruiser bars just to try out... Was looking at some old school S&M C4 riser bars, but they were super heavy and overbuilt...

looks like maybe BOSS used to make them, and Cyclecraft Fred Z....

google brings up a blast from the past ! check this....

heh, out of that list i had the basic whammy, elf, gt cruiser, gt freestyle, hoffman lowdrag, lovehandles, homeless (i can't believe i traded those!!), peregrine f/s, redline forklifter 7"s, s&m slams, standard 6 piece strips, and wilkerson san quentins....

http://www.bikepro.com/bmx/bmxbars.html

HANDLEBARS
ANSWER Alum-Expert-Cruiser Pro-Silver.................................... $ 45.99
ANSWER Aluminum Pro Blu-Blk-Purp.......................................... $ 45.99
ANSWER Aluminum MINI or JR bar-Silver................................... $ 24.99
BASIC WAMMY............................................. ...................................... $ 89.99
BOSS Bars - 4", 6", 8", Mini or Cruiser........................................... . $ 48.99
BRAND X ALUM PRO, EXPERT-S-P-B....................................... $119.99
BULLY Cro-moly Freestyle Bar............................................... .......... $ 36.99
CYCLECRAFT FRED-Z - 4", 6", 7.5"
........Green - Black - Purple - Blue - Chrome................................... $ 44.99
DK - PRO - Expert or CRUISER........................................... ............ $ 39.99
DYNO 4-PC................................................ ............................................ $ 26.99
ELF Bar - PRO or CRUISER........................................... ................... $ 34.99
ELF BLAST bar, 6-PC, 6", 7", 8"-Cro-mo...................................... $ 59.99
ELF Pro Aluminum Bar - 6", 7", 8".................................................. . $ 59.99
FRED ÔZÕ- Cro-Moly-Chrome plate-6"- 8"................................ $ 42.99
FLYÕN W PRO BONES or BONEYARD......................................... $ 54.99
GraveYard ORIGINAL.......................................... ............................... $109.99
GRAVEYARD Type 6". 7", 8" height
..........(Straight Across or with Sweep)............................................ ..... $ 69.99
GT US MADE Pro or Cruiser - Chrome............................................ $ 26.99
GT US MADE Aluminum Bar -JR or Mini...................................... $ 21.99
GT 4 Piece FreeStyle......................................... ..................................... $ 25.99
HARO Aluminum Racelite PRO-S-BK-B....................................... $ 29.99
HARO Knee Saver (Knee Saver II + $5).............................................. $ 29.99
HERRINGTON DISCIPLE.......................................... ........................ $ 99.99
HOFFMAN PATRIOT........................................... ............................... $ 49.99
HOFFMAN LOWDRAG........................................... ............................ $ 49.99
HOFFMAN LOVE HANDLES........................................... ................. $ 72.99
HOMELESS.......................................... .................................................. $ 45.99
JAD CRO-BARS.............................................. ...................................... $129.99
KASTAN Cro-moly Bars-Pro or Cruiser........................................... $ 44.99
MONGOOSE ALUMINUM -Silver or Blue....................................... $ 32.99
PEREGRINE PRO II or Q F/S BARS.............................................. .... $ 25.99
PEREGRINE SILVER 6".................................................. .................... $ 29.99
POWERLITE MICRO-MINI-JR-XRM-MX................................... $ 21.99
Powerlite BEASTY-Expert-Pro-Cruiser........................................... . $ 25.99
TNT or HYPER Pro Cro-moly Bar............................................... ....... $ 34.99
REDLINE Forklifter Pro F/S - 7" or 8" rise....................................... $ 29.99
RENTHAL Aluminum PRO Bar............................................... ........... $ 29.99
ROBINSON Cro-Moly Cruiser PRO Bar............................................ $ 24.99
ROCKET ALUM MINI, JR-S-P-B-R................................................ $ 24.99
RON ÒCÓ Bars - PRO or CRUISER........................................... ........ $ 36.99
S&M - SLAM, CHALLENGER, GAY............................................... .. $ 32.99
S E POWERWING - Chrome - 6" - 8"-10"....................................... $ 29.99
STANDARD STRIP BMX............................................... ........................ $ 34.99
STANDARD STRIP 6-PIECE............................................. ................... $ 54.99
WILKERSON SAN QUINTIN........................................... ..................... $ 44.99
2-HIP JUICE or FLAT.............................................. ............................... $ 46.99

[Evil4bc]

heh, out of that list i had the basic whammy, elf, gt cruiser, gt freestyle, hoffman lowdrag, lovehandles, homeless (i can't believe i traded those!!), peregrine f/s, redline forklifter 7"s, s&m slams, standard 6 piece strips, and wilkerson san quentins....


Crazy

i used to ride the Wilkerson sanQuenten bars , totally destroyed a set back in the day , also road the Hoffman love handles ( who really needs a 3lb bar ??)
And a few others bmx bars back in the day were wack , I'm still kicking myself for selling my redling race 7in thoes bars ruled best bars ever !!

[fiddy_ryder]

when are those 3"ers gonna be done?

[Evil4bc]

when are those 3"ers gonna be done?

About 2-3 weeks ,they wil be done very soon.

[w00dy]

Check the link in my sig. I've got a set of brooklyn bars that are pretty tall.