MRP + JFR = Problem

[Aztomac]

got a problem guys, putting together my JFR i found out that the MRP slalom guides inner ring hits the chainstay of my frame. I currently have a truvativ dh bb with 113 ISIS spindles, can i add spacers to fix this??? ahhhh imma kill myself i thought i was gonna get it down my tonight. Or would my other alternatiive be getting a 118 spindle, would it even make a difference??? any help will do fellas, appreciate it

[rotecguy]

Do you have the chainring on the inside of the tabs of the crank, or outside? If you have it inside (ie Inner plate, spacer, ring, crank, ring) then try mounting the whole thing further out (ie Inner plate, crank, ring, spacer, outer ring) and that should hopefully work. Does that make sense? I am not sure that was terribly clear, but you basically want to move everything further away from the frame.

[Colin]

I'm prety sure the only MRP you can use is a WC-2. My friend had the same problems with the slalom guide. I use a Blackspire with a 118mm spindle and everything is fine.