Black Market MOB Question

[Urban Bandit]

Ive found a complete that Im interested in buying. It comes with AtomLab wheel set, BlkMkt bars and clamp, FSA crank, fly headset and a Bomber fork.

What would a setup like this cost? Its only been used (not hardcore) for about 6 months.

Can I put pegs on this? How can I tell?
THanks for the help...
Im trying to get into dj/street ... any advice will be really appreciated

[Urban Bandit]

would a 20'' frame be too big for me if im 5'7'' 150 lbs?
can somone atleast answer me that? i dont want to purchase it and be dissapointed.....

[quickneonrt]

does it have horizontal or verticle dropouts? Pegs I doubt it and the smallest TT they make is 21.5. Without seeing pics it could be worth $1000 or better. The frame alone sells for $599. I just built mine verticle dropout model I wanted a derailler, pike coil uturn, white azonic outlaws, holtzfeller howitzer cranks 1x8 setup, truvativ chainguide modified to work w/raceface bashring, deore shifter and rear der. I-beam seat post and seat diablous stem,specialized bars canecreek hs ringle mag pedals, bb7s, ti levers and it is easily worth over $1600

[cmc]

remember: mountain bikes are measured by seat tube length, e.g. 17" or 20".

but bmx's and dj mtb's frequently measure top tube length. 21.5" is pretty much a medium. 22.5" is blkmrkt's XL.

[gonefirefightin]

who cares, the bottle opener is worth getting it alone

[Urban Bandit]

anyone got a close up of the bottle opener? :-P

[jeff da grom]

get it... you won't be disappointed with that frame. It's the best ht i've ever owned.

[organizedrage]

would a 20'' frame be too big for me if im 5'7'' 150 lbs?
can somone atleast answer me that? i dont want to purchase it and be dissapointed.....

hell no!!! im 6'0" 149 lbs and all you have to do is get a longer top tube frame like a 21" and its all good! Plus if you get good on a BMX bike then you will be able to kill it on a big bike such and a dj mountain bike. I would suggest getting a BMX cause it is a lot cheaper.

[wakeeater]

. cost maybe 800-1000. depending on exact part spec and condition. sizing should be good i personally would want a longer tt but that is just me.

[Urban Bandit]

i just got it in today.
needs a brake tho.. anyone got a suggestion? not expensive and i gotta make sure it CLEARS.

the BadaBing bars from BM seem a little long and will catch on the xUPS and bar spins... so i might need to shave em so they clear my legs.
:-( wish it had a longer TT... oh well

[.Pit Steelers.]

Avid bb5/7

[Urban Bandit]

the hub isnt set up for a disc, i need to run a V
i dont have money for another hub right now... or id go with a disc brake
any suggestions? i dont want to buy one and have it not clear

[Urban Bandit]

http://farm3.static.flickr.com/2248/1637318415_38d7e37567.jpg
Or am I wrong...?

[Stoked]

http://farm3.static.flickr.com/2248/1637318415_38d7e37567.jpg
Or am I wrong...?

nice seat clamp? what am i looking at?

[Urban Bandit]

am i able to put a vbrake on the back?
i dont think the hole is for anything functional that is why i am asking

[Stoked]

am i able to put a vbrake on the back?
i dont think the hole is for anything functional that is why i am asking

take a shot of the whole rear triangle of the bike. thats just a vent hole, it does nothing

[Urban Bandit]

http://farm3.static.flickr.com/2176/1640191721_72aca3966f.jpg

[Stoked]

edit* duh. i was lOOking for v mounts under the stays ala tonic, ha.

um sorry bro but you're brakless unless you get a disc hub. i dont see v mounts

[Urban Bandit]

there are no brackets on the seat stay

[Urban Bandit]

somthing was mounted on that hole though, i can see the marks with a circular mark around the hole itself

[jdschall]

Something like thus: http://www.danscomp.com/484009.php?cat=PARTS

[Urban Bandit]

http://www.danscomp.com/images/products/mid_484009.gif

you think that will fit/clear?

[organizedrage]

http://www.danscomp.com/489057.php?cat=PARTS

there you go! you can go with u brakes. have fun!!

[sittingduck]

You might have to drill out the hole in the seatstay brace a little, because the post on this is 10mm.
http://cgi.ebay.com/ACS-BOA-NOS-FRONT-BRAKE-CALIPER-BLACK_W0QQitemZ180171339999QQcmdZViewItem?hash=ite m180171339999