Easton Cully Bearings

[j-posch]

Anyone know what type of bearings these take and are they one cartridge and one needle or two cartridge in each pedal? Tried emailing Easton but never got a reply. Thanks

[SPDR]

One cartridge, one needle don't ask me sizes though - sure someone will be along in a minute to fill in the blanks . . . .

[Sam B]

I don't remember for sure but I thought it was one bearing and one bushing. It doesn't matter really, you'll be on your own to find replacements. They may be sizes that are common to other pedals, but Easton doesn't have bearing/bushing kits for their pedals.


Good luck!

Edit - I think I had the Flatboys, not the Cullys. Might account for the difference. I certainly don't remember any needles in there.

[dhkid]

nope, its one needle and one ball. knock them out and take them to your local bearing shop.

[RMboy]

yep just did mine, just one ball, and a bushing, but thats on flatboys, prob diffrent, cost me £13 for 2 new ones (postage and VAT to)

[Sam B]

yep just did mine, just one ball, and a bushing, but thats on flatboys, prob diffrent, cost me £13 for 2 new ones (postage and VAT to)


Where did you get the bushings and bearings? I ended up with pins when I called Easton for a pedal "rebuild kit" and chatted with the lady. Pins = rebuild kit? Hmmm....

[RMboy]

Where did you get the bushings and bearings? I ended up with pins when I called Easton for a pedal "rebuild kit" and chatted with the lady. Pins = rebuild kit? Hmmm....

I only got the bearings, becuse the bushings were fine.. Got the bearings form a local supplyer..just gave them the inner die, outer die and width...

hope this helped