888 seals

[ThePriceSeliger]

I've searches, but I can't find good information on taking the OIL seals out of the 888RC. It's going to kill me. I can't get a grip on it to pull it out.

[mr.loops]

I've searches, but I can't find good information on taking the OIL seals out of the 888RC. It's going to kill me. I can't get a grip on it to pull it out.

Personally, I like to use the Pedros tire lever to "pop" the seals out. You can also try on 12-15mm open wrench, or a big flat blade screwdriver.
Watch what you are doing - don't marr the magnsium lowers and be aware of the c-clip between the dust/oil seal

[ThePriceSeliger]

I got it out. You take the c-clip out before you take the oil seals out. I broke one screw driver, and my dumb self didn't think to use a tire lever, but I needed more leverage.

[OGDMFG]

Just remember which way you took the seal out:poster_oops:

[ThePriceSeliger]

I am pretty sure I put them in right. I know I did the dust seals right, but the oil seals are questionable I guess... Would I know right away?