PDA

View Full Version : 24" tape measure time.


Hougham
03-30-2007, 02:17 PM
I am just wondering what the difference in geometry’s of frames are. I am really just looking for 3 measurements.

Wheel base (middle of front wheel to middle of rear)
Rear (middle of bottom bracket to middle of rear wheel)
BB height (middle of BB to ground)

If any of you could take the time to measure your bikes and let me know what you get that would be great. If you could also let me know what frame it is, what forks you have and what tyres that would be most appreciated.

Many thanks

fiddy_ryder
03-30-2007, 02:30 PM
wb 42"
cs 15" (almost slammed)
bb 11.75

nemesis project deathmobile.
nemesis tunes Z1 sport at 75mm
halo 2.2 twin rails.

Hougham
03-30-2007, 03:27 PM
I have been given a old frame with no stickers. I built it up with some cheap 100mm rockshox and some well used 24" wheels with some unbranded 2.0 tyres on. its;

wb ~ 21.5"
cs ~ 15.25"
bb ~ 13"

It looks a bit high and long in the back?

Hougham
03-31-2007, 12:05 PM
any more out there? one or two more people would be great.

Thanks

East Bay Rich
03-31-2007, 04:32 PM
I'm going off of memory here, so my #'s might be a bit off.

CS- 15.625"
BB- ~11.5+/-"
WB- ~41-42

SS, SC Chameleon (Med), w/ rear axel all the way in
24's
DMR TBII