e10_is_a_boss
01-25-2007, 10:12 PM
i built up my 05 demo 8 pro but im haveing rear suspension problems.. the nonpiggy back side of the shock wiggles around where it mounts to the frame. i dont think i have the right hardware or something in there.. i cut down a fox reducer to make a sleeve to fit in the middle of the eyelet (the non piggyback side). the eyelet has two cone washers that fit up against the sleeve thats in the eyelet and against the bearings/mounts in the frame. but this little problem makes the back of the bike wash out/rattle/chatter/hop around any turn if u go to fast. even on cement.. its just stupid. so its pretty much unrideable.. i would appreciate some help getting the slop out of my shock..