rear peg on a 26in dirt jumper/street bike

[Garrett 0 P]

im looking to buy a new wheelset and i kinda want to but something that i can throw a rear right peg on. only one peg tho.

is this possible with the new azonic outlaw wheelset?
http://www.pricepoint.com/detail/15675-365_AZOOL7-3-Parts-75-Wheelsets/Azonic-Outlaw-Wheelset-'07.htm

i have an 06 felt doubleshot.

uhh thats about it.

[dexter]

it will work, but you will want a solid steel axel. your best bet would be to buy a profile, haldey, woodman etc bolt on hub in 3/8's and use whatever front hub and rims your want. alum axels and pegs= death

[fiddy_ryder]

not sure if the axle is gonna be long enough on the azonics for a peg.

[ÆX]

do a thru alxe 10mm or 12 and drill out your dropout.

http://bcdracing.com/pics/9th/peg.JPG

[ServeEm]

10mm would be the english equivelent to 3/8 right, and you'd prolly might need to drill out a tad on your peg too. 10mm is slightly larger than 3/8" by a hair.

[THRILLSEEKA]

Bombshell makes a new Berrecloth Sig Series just for that purpose. Decent wheelset, a tad heavy but I love my Fat Daddy rims...

[ServeEm]

owww, a Berrecloth Sig wheel set? I'd cop those.

[skatetokil]

BCD, do you as a frame builder actually support people drilling out their dropouts? I have a 10mm frame and I'm pretty handy with my tools, but i'm not sure I'd do it.