Just finished my ss convert

[eaterofdog]

It's a nashbar steel frame with a 4" Judy fork. I also have a Surly rigid fork if I want it. It feels smooth and fast without all that clanking, buzzing crap in the chainline. It's also pretty light with all of that stuff removed. I was going to sell it but maybe I'll buy some new wheels and brakes. I have room. LOL

[eaterofdog]

It weighs in at 26 lbs. Took it on the trail this morning and it is fast. Gearing is 32:18. The rear brake was rubbing on the bigass Geax Blade 2.25 tires so I took it off.

[Xterradork]

So any new info to report? I've been planning on replacing my Alu frame with a steel frame, then started to think about going SS. Your post makes me think about building up a SS bike like you did. The only other thing I would need is brakes (in addition to the frame, headset, fork and SS conversion stuff)

[eaterofdog]

I think I am going to put my rigid Surly fork back on. It'll cut a couple of pounds and make the front end stiffer. I should have enough cushion using the fat 2.25 tires. I broke up the old cassette for the rear gear and modded the Deore derailler for a chain tensioner, so I didn't spend any money on the conversion.

The bike is fast on the trails. The gearing sets the pace, as I want a certain spin while I'm cruising. I have to stop and wait for my riding buddy when I am on this bike.

I like it. It's a nice change from my freeride hardtail.

[partsbara]

nice bike... is that one of the nashbar 90 buck frames ??? looks great... i got my wife a cheap reken alum (100 bucks) frame from price point... works out great as her SS...

have fun on it :banana:

[eaterofdog]

I got the frame a couple of years ago for like $75. The rest is bits and pieces from bikes I've worn out. It's 23.5 lbs with the rigid fork. I rode 5 miles out to the river today and went swimming. It's a great bike for getting around.

[Quo Fan]

I've beeen thinking about one of these frames for my SS. Are you running discs or rim brakes?

[eaterofdog]

I am running a front rim brake only.

[Xterradork]

I've been looking at a steel frame, the one you have is now on sale with a seat post for $45. Funny thing is, between this frame and the Nashbar 853 frame, is a difference of only 1.3 lbs. (but $240), sounds like I may be building up a full SS bike (rigid fork, Nashbar disc brakes, etc.) for the same price as the 853 frame! Ofcourse I have extra wheels, cranks, bars, etc. already laying around. Thanks for the info and the picture. It was a big help!

[eaterofdog]

I've been looking at a steel frame, the one you have is now on sale with a seat post for $45. Funny thing is, between this frame and the Nashbar 853 frame, is a difference of only 1.3 lbs. (but $240), sounds like I may be building up a full SS bike (rigid fork, Nashbar disc brakes, etc.) for the same price as the 853 frame! Ofcourse I have extra wheels, cranks, bars, etc. already laying around. Thanks for the info and the picture. It was a big help!

$45 is a good price. I could have sold this bike twice in the last two weeks. The clean look draws them in, I guess.

The rigid setup really gets the power down. No bouncing and no mush.

It's a great way to use up some old parts. The only drawback is having a $200 that's as fun as a $1000 bike. As Joe Dirt would say, dang.

You are welcome, glad to help out.

[Xterradork]

You know, I'm thinking if it's that nice, I may get two of them. One for
the SS bike and one to outright replace my Ironhorse Maverick Disc
frame. Heck, it really seems like a nice ride, and since it's so close to
the higher priced 853 in weight.