PDA

View Full Version : I'm scared of my laptop!!!(dell recall)


rideit
08-15-2006, 01:54 PM
so, a ****ton of Dell laptop batteries are being recalled due to fire potential, including my 600m.
https://www.dellbatteryprogram.com/Default.aspx

urbaindk
08-15-2006, 02:02 PM
so, a ****ton of Dell laptop batteries are being recalled due to fire potential, including my 600m.
https://www.dellbatteryprogram.com/Default.aspx


Let this be a lesson to you. Never actually place the laptop on your lap. Especially while surfing porn.

Barbaton
08-15-2006, 02:52 PM
http://www.tgdaily.com/picturegalleries/20060731/laptop.jpg

http://static.flickr.com/90/206346391_fb7b9fad78.jpg

http://www.blogsmithmedia.com/www.engadget.com/media/2006/07/upsplane.jpg

"Hot on the heels of Dell investigating its own case of spontaneous combustion, the National Transportation Safety Board (NTSB) is now getting in on the act, looking into the possibility that laptop batteries may have started a fire on a UPS cargo plane that was forced to make an emergency landing last February." (http://www.engadget.com/2006/07/15/ntsb-looks-to-laptop-batteries-as-possible-cause-of-plane-fire/)

Reactor
08-15-2006, 02:58 PM
I'm so glad I purchased a toshiba !!!

N8
08-15-2006, 02:59 PM
I'm so glad I purchased a toshiba !!!

me too except for the crappy power plug design on it...

Pat...
08-15-2006, 03:31 PM
I'm so glad my inspiron isn't affected.

rideit
08-15-2006, 03:34 PM
If I could make a device that would harness the wattage produced by masturbation, the world energy crisis would be over.

Spunger
08-15-2006, 03:42 PM
me too except for the crappy power plug design on it...

On ours the plug isn't the problem it's the hinges to the screen! I gotta take it apart and tighten them :)

Pat...
08-15-2006, 03:47 PM
If I could make a device that would harness the wattage produced by masturbation, the world energy crisis would be over.

:rofl: :rofl:

On my dell, the plug (end that goes into computer) sucks. They should make a 90* adapter. I have gone through 3. When I put my computer on my desk, the cord does a 180* bend, then toward me and down into the outlet. That bend wears out the part between the tip and cord. It opens up and the wire is exposed. I put a zip tie to stiffen it, and then wrapped it in red electrical tape. It's much better now.

binary visions
08-15-2006, 03:51 PM
On my dell, the plug (end that goes into computer) sucks. They should make a 90* adapter. I have gone through 3. When I put my computer on my desk, the cord does a 180* bend, then toward me and down into the outlet. That bend wears out the part between the tip and cord. It opens up and the wire is exposed. I put a zip tie to stiffen it, and then wrapped it in red electrical tape. It's much better now.
I completely agree, mine is the same way and I am on my second power adapter... but only because I pulled the first one apart and ghetto-repaired it for a few months.

I wrapped mine in layers of duct tape to keep it from flexing as much but I pulled it apart to check it the other night, and found that the problem was still occuring... just slower.

I'm seriously considering coating the entire plastic section behind the metal plug with epoxy to make it one solid, inflexible piece. I haven't been able to discern a real reason why that wouldn't work, besides making it slightly inconvenient to have a solid piece sticking an inch or so out the back of the laptop.

llkoolkeg
08-15-2006, 03:56 PM
If I could make a device that would harness the wattage produced by masturbation, the world energy crisis would be over.

Why not try to harness the productivity lost to the :monkey: and take over the world, instead?

rideit
08-15-2006, 04:02 PM
That would violate the slacker creedo. And would take up precious time!

Pat...
08-15-2006, 04:07 PM
I completely agree, mine is the same way and I am on my second power adapter... but only because I pulled the first one apart and ghetto-repaired it for a few months.

I wrapped mine in layers of duct tape to keep it from flexing as much but I pulled it apart to check it the other night, and found that the problem was still occuring... just slower.

I'm seriously considering coating the entire plastic section behind the metal plug with epoxy to make it one solid, inflexible piece. I haven't been able to discern a real reason why that wouldn't work, besides making it slightly inconvenient to have a solid piece sticking an inch or so out the back of the laptop.

That sounds like a good idea. Maybe put some silicon after that over the cord part to ease the stress. Or you could put it over the cord and make it bend 90* to relieve most all the stress.

Pat...
08-15-2006, 04:21 PM
Another thing...

I hate the tap to click feature on my touchpad on my laptop. When I do photoshop (brush tools) or anything else, stuff gets accidently clicked. I like to just use the button to click.

When I uncheck the box for tap to click, it goes off. Soon, (maybe an hour) it's back checked (default). This is so frustrating. I have to go uncheck it so often.

Any ideas why it's doing this and how to fix it?

binary visions
08-15-2006, 04:24 PM
Uninstall the touch pad software.

Westy
08-15-2006, 04:33 PM
My company had some batteries that shorted out from shipping damage and caught fire. The result was a few hundred million dollars worth of stuff in a warehouse lost to fire.

BigMike
08-15-2006, 05:52 PM
Thats why I'm glad I got me a MacBookPro! :D

Pat...
08-15-2006, 06:08 PM
My company had some batteries that shorted out from shipping damage and caught fire. The result was a few hundred million dollars worth of stuff in a warehouse lost to fire.

That's not good. :eek:

robdamanii
08-15-2006, 07:17 PM
No problem with either laptop in this place.

firetoole
08-15-2006, 08:09 PM
http://www.engadget.com/media/2006/06/toastylappy.jpg

Nobody
08-16-2006, 07:54 AM
More info...

Sony Corporation, which has been making a steady comeback in its electronics and entertainment divisions, was hit hard Monday when it was announced that it would share the costs with Dell Inc. for the recall of 4.1 million laptop computer batteries that may explode in flames. The recall, expected to cost upwards of a quarter billion dollars, followed a report in the Wall Street Journal on Monday observing that such batteries pose a particular threat to airliners. The recall would be the largest in the history of the consumer electronics business, reports said. Nevertheless, shares in Sony rose 1.5 percent higher at midday today (Monday). In an interview with Bloomberg News, Mitsuhiro Osawa, an analyst at Mizuho Investors Securities Co. in Tokyo, said, "Market reaction to the news has been weak because it is difficult to measure the impact of the recall."

urbaindk
08-16-2006, 08:47 AM
High component density = thin wires = ohmic heating = bad news.

Austin Bike
08-16-2006, 07:22 PM
Thats why I'm glad I got me a MacBookPro! :D

Unless you realize that Sony probably made their batteries too.

There are only ~5 or 6 companies that actually make batteries, everyone puts their name on them.

Plus, there have been reports of flaming apples instead.

Think the same.

johnbryanpeters
08-16-2006, 07:28 PM
High component density = thin wires = ohmic heating = bad news.
It wasn't wires it was metal fragments from a crimping process that shorted out battery plates leading to rapid discharge and fire.

Sony quality control problem, not a Dell problem.

Silver
08-16-2006, 07:50 PM
What ever happend to that made in Japan quality? :)

My old laptop's battery was made in Thailand. Not on the list for the recall...

Kornphlake
08-17-2006, 03:51 PM
:rofl: :rofl:

On my dell, the plug (end that goes into computer) sucks. They should make a 90* adapter. I have gone through 3. When I put my computer on my desk, the cord does a 180* bend, then toward me and down into the outlet. That bend wears out the part between the tip and cord. It opens up and the wire is exposed. I put a zip tie to stiffen it, and then wrapped it in red electrical tape. It's much better now.


If you are handy with a soldering iron you can buy a 90* adaptor and just replace the connector when the cord wears out next time. You should be able to find a suitable connector at www.digikey.com, www.mouser.com or maybe at Fry's or Radio Shack. The connector should cost less than a dollar and if you buy a couple of extra ones you can repair the cords you've already broken and give them to your friends or sell them on eBay.