Dartman
05-10-2006, 09:34 PM
I use a Park starnut setter but this'll work in a pinch...
http://www.pbase.com/mrdart/image/59987891.jpg
It's a 1/2" size 1/4" drive deep socket with the topcap bolt dropped down inside. Thread the starnut to it and hammer it in to about 15mm depth below the top of the steerer.
Mike
http://www.pbase.com/mrdart/image/59987891.jpg
It's a 1/2" size 1/4" drive deep socket with the topcap bolt dropped down inside. Thread the starnut to it and hammer it in to about 15mm depth below the top of the steerer.
Mike