PDA

View Full Version : jamis derailer hanger

BIRDMAN111
04-02-2006, 11:16 AM
hey do any of you guys in richmond know if there is a jamis dealer in town. some of you know i just f'ed the crap out of my hanger and need a new one. and seeing that its is now spring break and i dont have a bike i need one faster than ordering it on line.
thanks
Dartman
04-02-2006, 11:30 AM
http://www.derailleurhanger.com/

To all who have replaceable hangers, carry one on a ride. It's like a good luck charm!

Mike
BigMike
04-02-2006, 01:20 PM
If i'm not mistaken, Goodly's sells Jamis now
denjen
04-03-2006, 09:17 AM
call goodly bikes in richmond 804 965 9837
jvp108
04-03-2006, 02:39 PM
Good luck finding one at an LBS, I agree with Dartman....that's the best site.
Dartman
04-03-2006, 04:18 PM
call goodly bikes in richmond 804 965 9837

Duk can should be able to order one. He does have a bucket-o-GT parts from way back however.

Mike
BigMike
04-03-2006, 11:30 PM
Good luck finding one at an LBS, I agree with Dartman....that's the best site.

I disagree. I bent the FVCK out of my hangar for my Flow, went to Rowletts, went in the back and James had one right there.

I've gotten many other hangars from them as well.
SK6
04-04-2006, 10:53 AM
I disagree. I bent the FVCK out of my hangar for my Flow, went to Rowletts, went in the back and James had one right there.

I've gotten many other hangars from them as well.

They knew you were coming...:rolleyes:

:rofl: :rofl:


:p
metalMTB
04-04-2006, 04:05 PM
you could always bend it back until you get a new one
BigMike
04-04-2006, 04:51 PM
They knew you were coming...:rolleyes:

:rofl: :rofl:


:p

actually, yeah!

They used to stock some stuff just for me when they knew I was coming :)
BIRDMAN111
04-08-2006, 10:47 AM
i got the part but performance ordered the wrong one. it is too thick and places the rear derailleur too far away from the rear cassette so wont go to first gear. if you get it to first gear it goes too far past the smallest cog. errrr...
wood-dog
04-08-2006, 12:36 PM
you could always bend it back until you get a new one

Actually he can't. He went down so hard he not not only twisted the der hanger but he broke it into 2 pieces rendering it unusable.
wood-dog
04-08-2006, 12:39 PM
i got the part but performance ordered the wrong one. it is too thick and places the rear derailleur too far away from the rear cassette so wont go to first gear. if you get it to first gear it goes too far past the smallest cog. errrr...

can't you reset the adjustment screws so that the der will be able to align with the first gear? I can take a look at it if you want me to.
mud'n'sweat
04-08-2006, 12:56 PM
You don't need no hanger, just duct tape that suma'bitch.
wood-dog
04-08-2006, 01:01 PM
You don't need no hanger, just duct tape that suma'bitch.

This is funny comming from a guy who breaks something every time he rides :D
mud'n'sweat
04-08-2006, 01:06 PM
And %50 of the time it's a derailer hanger :rofl:
wood-dog
04-08-2006, 03:27 PM
true, so true!
BIRDMAN111
04-08-2006, 05:19 PM
can't you reset the adjustment screws so that the der will be able to align with the first gear? I can take a look at it if you want me to.
no the derailleur's travel wont reach the largest cog it only comes to the second largest one. i found what i needed but the part wont be here till wed. or thr.
BIRDMAN111
04-08-2006, 06:09 PM
and ive decided to use the derailleur gaurd that comes on kiddy bikes so i might not have to deal with this s*** again. ive got the mounting holes for it too.
Bearmntpicnic
04-08-2006, 07:03 PM
hahah sweet