PDA

View Full Version : I need an Evil Supercharger but.........

BigMike
04-26-2005, 08:54 AM
I need to get a Supercharger for my RMX. When I bought it, it came with an MRP, and I dont have money to get a whole new guide. That cheap little outer plate is just not doing it for me. I have no idea what size to get to make it fit under that little orange roller. It has a 34 on it now, But I'm goign to make that a 36, which I belive is the maximum that MRP will take.

:help:
in the trees
04-26-2005, 09:00 AM
The e-13 bashguard in the Urban size (36T) should fit. Mine measures about 6 5/8" in diameter or so. I hope this'll help.

toby
BigMike
04-26-2005, 09:12 AM
The e-13 bashguard in the Urban size (36T) should fit. Mine measures about 6 5/8" in diameter or so. I hope this'll help.

toby

Thats what I was thinking, its the smallest one they make, but I dont KNOW if it will fit.

Thats why I came on here :)
nor-calripper
04-26-2005, 09:22 AM
Well you could get out a ruler and see if your mrp plate is anywere near the 6 5/8" urban e13 plate, that might tell ya...
lanman
04-26-2005, 10:09 AM
Which MRP is it? ststem 2 I know uses the east coast supercharger. Find out what system MRP it is and give E-13 a call and they can tell you exactly what you need
ZEDMAN
04-26-2005, 12:45 PM
i had that problem when i went and bought a supercharger for my mrp. i have to run the mrp that goes max 40t for clearance issues on a vpfree. i only run a 38t but the mrp plate require the rollers to be maxed out on the guide. i got the 40t e-13 guard and or course it was way too big. so my dad got out the router and machined the plate down to the same size as my mrp plate. :thumb:
BMXman
04-26-2005, 12:50 PM
:thumb:
http://imagehost.vendio.com/preview/bm/bmxman817/e13superchargers.jpg
Brian HCM#1
04-26-2005, 12:54 PM
You don't want that red bashguard do you D?
BMXman
04-26-2005, 12:59 PM
haha fat chance...D

http://imagehost.vendio.com/preview/bm/bmxman817/docside1.jpg
Brian HCM#1
04-26-2005, 01:22 PM
haha fat chance...DDamn, well it was worth a shot :D
seismic
04-26-2005, 01:56 PM
the red one is bling !
mobius
04-26-2005, 02:10 PM
Ask an e13 person i forget what it is but you either want one size smaller or bigger not sure.
PAMS 25
04-26-2005, 04:50 PM
You can drop a line to Jonas @ E.13, really helpfull people.
If that can help, here is his answer to my question which is basically the same of your.

Hi Pierre,
Sorry about the delay in response time. I've been on the road for a race about 3000 miles from my home, so I've been a little out of touch with my email. Here are the bashguard diameters. Let me know if this does not help. I'll be back in the office on Thursday.

36T-169mm

40T-185mm

42T-193mm

44T-201mm