Need Help! is 118mm fine on a bullit? [Archive]

View Full Version : Need Help! is 118mm fine on a bullit?

bullcrew

01-24-2005, 04:42 PM

scenario: I have a 01 bullit large, I run a e-13 drs system on it. I have a truvative 113 b.bracket on it, and new hussefelt cranks.
When I tighten my cranks down the small chain ring bolts dig and groove into the e-13 bommerang. I bought a FSA platinum pro isis bb 118mm. Is it ok to use on this frame. If not why?

zane

01-24-2005, 05:24 PM

I don't see a problem, it should solve your bolt interference issue. As long as it's for the right size BB shell I say go for it.

captainpolution

01-24-2005, 11:01 PM

word, i run a 118 on my 03 bullit and its ight

binary visions

01-25-2005, 07:12 AM

Call E.13, they will get you sorted out quickly and have loads of experience.

ZachTheMech

01-31-2005, 03:04 AM

Should work fine, 2.5 on each side would make it perfect to clear the bolt heads/plate. More important would be 68 or 73mm shell. Raceface makes there BBs 68/73 together while FSA are 68 or 73 specific. but in your case if you have a 68 its quite possible you can run a 73 because with the added plate of the E-13 your essentially making your shell width into 73.