I need brake help "anyone"

[bullcrew]

I bought a s cruz bullit "01" from a freind and I have some hayes 9's I want to put on, I have the 6" rotor for the back and 8" for the front.
My shock is a stratos S7 and I in my pile I cannot find an adapter to fit the calipers to the frame or fork. The S7 is a 20mm.
Any help would be appreciated.
Thanks from a fellow NW rider.

[bikeguy100k]

It uses a standard 5" adapter in the rear and you need a standard 20mm front adapter for the fork. I used to have a Bullit set up exactly the same way with the same fork! Contact your local shop or go to hayes' site for the proper adapter numbers. Good luck!

[bikeguy100k]

It uses a standard 6" adapter in the rear and you need a standard 20mm front adapter for the fork. I used to have a Bullit set up exactly the same way with the same fork! Contact your local shop or go to hayes' site for the proper adapter numbers. Good luck!

[DBR X6 RIDER]

Which is is, Tom?:confused:
:eviltongu

[bikeguy100k]

Hush up Andy... I made a mistake, geez. Cut a guy some slack! :nuts: